If you’ve been keeping up and read my last post you know that we bought all new paint colors for the house. While picking out the colors and bringing them home hand me jumping up and down like an excited school girl ready to jump right in and start painting – my more practical counterpart ensured we did the proper prep.

We collected all of the painting supplies we had leftover from when we painted the condo (see here, here, and here) and laid them out on the dining room table to see what we had and what we needed.  Then Ken went around the room with a flash flight (the lighting in there is currently a single bulb in the center of the room – thus very very bad) to find any imperfections (paint drips, globs, popped nails) in the wall so that we could mark them to be sanded down.

Then we covered the dining room table in a tarp which I think made it look like a Dexter Kill Room

Perhaps it is.. Afterall this is the Room the Builder Grade White Paint Came to Die dun dun dun… Thanks to the Master Hide (seriously that is the name of it) paint the builder used there were actually quite a lot of imperfections; some we had noticed previously, some we had not. They were all sanded down and the ones that needed it were compounded then sanded down again.

Thankfully the builder was nice enough too lazy to move the paint out and we used it to go over the sanded spots bringing it back to a nice smooth even colored surface. Had we been priming this step might have been unnecessary however we are using the builder white paint as a primer level and didn’t want any discolored spots showing through.

After the “primer” dried I worked my way around the room with a ladder cutting our chosen color (Coventry Gray by Benjamin Moore) in while Ken taped off around the doors and windows. Including this nice teeny tiny area between the window and the door. Seriously what were they thinking when they put these things so close together?

Not only does it complicate the painting (I had to use a tiny craft brush) but it creates a conundrum on how exactly we are going to hang a curtain rod here. We have some ideas but are definitely open to suggestions as well 🙂

Once the taping was done and I was about 3/4 through the room with the cutting in process Ken rolled the walls. This is a decent sized room and we really wanted to try to get it done in one coat and with one gallon. (paint for an entire house is expensive) Lucky for us we had decided to go entirely with Benjamin Moore paints for our house – a brand we had never used before – and learned you definitely do get what you pay for with paint. The Benjamin Moore paint covered much thicker, didn’t come off the wall if you rolled over a still wet painted area and had a much more even coating we couldn’t see the roller or brush marks after the one coat which is something that always bothered us with the “bargain paint” when painting the condo.

We made it by the skin of our teeth, there was merely a drop left in the bucket once the first coat was done. I wasn’t able to get very good pictures due to the crappy lighting single bulb and the fact that the kill room will be set up until all the rooms are complete; but you can get the general idea for now.

So there we go, 1 room down 9 more and the hallways to go!